CloudShell 2 for XU4 with 15V/4A Power Supply and 3pin US cord
CloudShell 2 for XU4
The CloudShell-2 for the ODROID-XU4 is an affordable DIY Network Attached Storage (NAS) Solution with RAID support. Like the original CloudShell, it includes a color LCD and IR receiver on the front, but adds support for USB Attached SCSI (UAS or UASP) and useful data storage technologies (RAID-0, RAID-1 and SPAN). It offers dual slots for 3.5” HDD/SSD drives. The CloudShell-2 also includes a USB 3.0 to SATA bridge (JMicron JMS561), which supports UAS and allows installation of a dual 3.5" SATA HDD/SDD storages.
- 2 Drive Bays
- Supported size : 3.5" SATA HDD
Supported RAID Type
- RAID 0
- RAID 1
- Color: Clear, Smoky Blue
- Size (Height x Width x Depth): 140 mm x 110 mm x 221.5 mm
- Weight: 0.64kg(without HDD)
- Fan 92 mm x 92 mm (cool and quiet modes)
- IR Receiver (remote controller not included)
- 2.8" 320x240 TFT LCD
- 15V/4A Power Supply with 3pin power cord US plug (included)
** XU4 and HDDs are not included.
Further information is available in the WiKi. : https://wiki.odroid.com/accessory/add-on_boards/xu4_cloudshell2/xu4_cloudshell2
Hardware Block Diagram
You don't need to connect another power supply to XU4.
We have two different color choices. Smoky-Blue and Clear-Transparent.
Laser cut acrylic enclosure
CLOUDSHELL 2 BOARD DETAIL
Assembly Guide : https://wiki.odroid.com/accessory/add-on_boards/xu4_cloudshell2/xu4_cloudshell2
320x240 TFT LCD Display example
Performance : Local storage speed test with two WD 6TB Red NAS HDDs on Kernel 4.9 LTS with USAP driver.
Cloudshell 2 is a great choice to build you own DIY high performance Network Storage!