VuShell for VU7

  • $29.00


Description

VuShell for ODROID-VU7

VuShell is a laser cut acrylic enclosure for the ODROID-VU7 and ODROID-VU7 Plus.
You can make your own desktop PC with the fancy VuShell. 
VuShell allows for two different viewing angles. 

TECHNICAL DETAILS 
- Dimension : 206 x 206 x 193 mm(approx. assembled)
- Weight : 395g approx.
- Color : Smoky Blue

VuShell Package

Package includes:

A. Front piece
B. Left side piece
C. Right side piece
D. Bottom1 piece
E. Bottom2 piece
F. Bottom3 piece
G. Cover piece
H. 16 x 5 mm screws (Philips dual round head, metal)
I. 4 x 6 mm screws (Philips pan head, metal)
J. 8 x 8mm female hex PCB spacers (metal)

- You need a small Philips bit screw driver. 
- Laser cut acrylic pieces, screws and spacers are included.

Note : Please take all steps with special care. Acrylic pieces are easy to crack. 

- ODROID-VU7/VU7plus and related accessories are NOT included

 Assembly guide for ODROID-C1+

VuShell Guide 1 Step 1

Peel the protective backing off both sides of all the laser-cut parts.
VuShell Guide C1 2 Assemble the front piece first.

You will need ODROID-VU7 package, (A), 8 x (H), 4 x (J)
VuShell Guide C1 3 Step 2

Align a spacer(J) on the bottom side and a screw(H) on the top side. Insert a screw and tighten it carefully. 

Keep the screw hole empty at the top middle marked with an X in the picture. 

Check Step4 for the other side of the ODROID-VU7.
VuShell Guide C1 4 Step 3

You need screws and spacers bundled with ODROID-VU7.

Align a spacer on the bottom side and a screw on the top side. Insert a screw and tighten it carefully

You only need to install screws at the 2 points marked with an O in the image.
VuShell Guide C1 5 Step 4

Continue using the screws from the ODROID-VU7 bundle.

Add screws at the 2 points marked with an O in the image. Insert screws and tighten them gently. 
VuShell Guide C1 6 Step 5

Plug in the Micro USB link board and the HDMI link board. 
VuShell Guide C1 7 Step 6

Assemble the front piece(A) with the ODROID-VU7.

You need 4 x (H). Tighten it gently. 

Don't tighten too much or the acrylic will crack.

VuShell Guide C1 8 Step 7

Assemble the front piece(A) and right side piece(C).
Align the locker on the front piece with the locking hole on the right side piece(C). Apply gentle pressure to it. 

VuShell Guide C1 9 Step 8 

Assemble the bottom1 piece(D). 
Align the locker on the bottom1 piece(D) with the locking hole on the right side piece(C). 
Apply gentle pressure to it. 
VuShell Guide C1 10 Step 7

Assemble the bottom2 piece(E).
Align the locker on the bottom2 piece(E) with the locking hole on the right side piece(C). 
Apply gentle pressure to it.

VuShell Guide C1 11 Step 8

Assemble the bottom3 piece(F). 

Align the locker on the bottom3 piece(F) with the locking hole on the right side piece(C).
Apply gentle pressure to it. 
VuShell Guide C1 12 Step 9

Assemble the left side piece(B).

Align the locker on each piece with the locking hole on the left side piece. Apply gentle pressure to it. 
VuShell Guide C1 13 Step 10

Align the cover piece(G) on the hole with the left side piece(B) and the right side piece(C). 
VuShell Guide C1 14 Step 11

Input the power source. 
VuShell Guide C1 unlock 15 Tip! Unlocking

Pinch the edge of the each locker with two fingers. Please be careful not to crack the locker.
VuShell Guide C1 16 Beautifully honeycomb shaped side and ODROID logo back. 
VuShell Guide C1 17 Ideal 2 step viewing angle. 

 

 

 



Assembly Guide for XU4

VuShell Guide XU4 1 Step 1

Peel the protective backing off both sides of all the laser-cut parts.
VuShell Guide XU4 2 Step 2

Align a spacer(J) on bottom side and a screw(H) on top side. 
Tighten it gently. 
Leave the screw hole empty at top middle marked with an X in the picture. 
VuShell Guide XU4 Step 3

Assemble the front piece(A) with the ODROID-VU7. 

You need 4 x (H). Tighten it gently. 

Don't tighten too much or the acrylic will crack.
VuShell Guide XU4 2 Step 4

Align a spacer(J) on bottom side of the ODROID-XU4 and a screw(I) on top side of ODROID-XU4. 
Insert a screw and tighten it gently. 
VuShell Guide XU4 3 Step 5

Align the screw and spacer installed ODROID-XU4 on the bottom piece(E). 
VuShell Guide XU4 4 Step 6

Give a screw(H) a few easy turns on bottom side. 
VuShell Guide XU4 5 Step 7

If you do not want to install the SATA drive, please skip to Step 11. 

SATA Bridge Board package is not included. 

The black rubber rings work as spacers. 
Align the center of the black rubber ring on the screw hole of SATA drive. 
Standard SATA drives have 4 screw holes. 
VuShell Guide XU4 6 Step 8

Align the screw hole of the bottom1 piece(D) on top. 
Give a few easy turn. Please make sure not to tighten it too much. The SATA Bridge board needs 1mm of space between the SATA drive and the bottom1 piece. 
VuShell Guide XU4 7 Step 9

Plug the SATA Bridge board to SATA drive. 

SATA Bridge board includes
- SATA Bridge board
- 4 x black rubber rings
- USB 3.0 Cable
VuShell Guide XU4 8 Step 10

Plug one side of USB3.0 cable to SATA Bridge board and the other side to USB3.0 port on ODROID-XU4. 

VuShell Guide XU4 9 Step 11

Plug Micro-toTypeA USB Cable to USB port on the ODROID-XU4. The cable is bundled with the ODROID-VU7.


VuShell Guide XU4 10 Step 12

Plug TypeA-to-TypeA HDMI Cable to HDMI port on ODROID-XU4. The cable is bundled with ODROID-VU7.
VuShell Guide XU4 11 Step 13

Assemble the installed front piece(A) with the left side piece(B). 
Align the locker on the front piece(A) with the locking hole on the left side piece(B). Hold the front piece(A) and press gently the left side piece(B) with your fingers. 



VuShell Guide XU4 12 Step 14

Assemble the bottom1 piece(D).
Align the locker on the bottom1 piece(D) with the locking hole on the left side piece(B). 
Press it with your fingers gently. 
VuShell Guide XU4 13 Step 15

Assemble the bottom2 piece(E).
Align the locker on the bottom2 piece(E) with the locking hole on the left side piece(B). 
Hold the bottom2 piece(E) and press the left side piece(B) with your fingers gently. 
VuShell Guide XU4 14 Step 16

Assemble the bottom3 piece(F). 
Align the lock on the bottom3 piece(F) with the locking hole on the left side piece(B). 
Hold the bottom2 piece(F) and press the left side piece(B) with your fingers gently. 
VuShell Guide XU4 15 Step 17

Pass through the HDMI cable and USB cable via honeycombs. Please check the right honeycomb location from the below image. 
VuShell Guide XU4 16 Step 18

Assemble the right side piece(C).

Align each locker on each piece with the locking hole on the right side piece(C). And press it gently with your fingers. 
VuShell Guide XU4 17 Step 19

Plug the HDMI cable to the HDMI connector on the ODROID-VU7.
VuShell Guide XU4 18 Step 20

Plug the microUSB cable to microUSB connector on the ODROID-VU7. 
VuShell Guide XU4 19 Step 21

Check that the cables are plugged in correctly. 
VuShell Guide XU4 20 Step 22

Check that all the installation is done correctly. Input the 5V/4A Power Supply through one of honeycomb openings. 
VuShell Guide XU4 21 Step 23

Align the cover piece(G) with the hole on the left side piece(B) and the right side piece(C). 
VuShell Guide XU4 22 The desktop version of ODROID-XU4 is here.